Top 5 Pre-Laminated Melamine MDF Sheets Suppliers in Saudi Arabia for Bulk Buyers
| Supplier | Location / Supply Model | Key Strengths | Sizes & Thickness Options | Technical Performance / Standards | Best For | MOQ & Ordering Process |
|---|---|---|---|---|---|---|
| Lamintec (Salco Laminates Industry) | UAE | Full vertical integration (resin + paper impregnation + pressing) High capacity for large orders | 2100×2800 mm2120×3150 mm17–18 mm (custom available) | Standard melamine-faced MDF (TFM) Single/double-sided | Kitchens, wardrobes, office furniture, hotel chains | Project-based inquiries Custom specs confirmed with factory |
| Modecor (Madar Group) | Saudi Arabia | EN 14322 compliant Four textures: Matt, Pearl, Nature Touch, Ash Wood | 1220×2440 mm3–25 mm | EN 14322 scratch, stain, and crack resistance | Furniture makers, interior designers, shopfitting | Contact via website or dealers Order based on project size |
| Baier | China (export-focused manufacturer) | Moisture-resistant + fire-rated MDF Premium metrics: 1.4% absorption, 0.75 MPa IB, 730–850 kg/m³ density | 1220×2440–3050 mm6–18 mm (custom available) | E1 emission (0.04 mg/m³) High screw-holding strength, low swelling | Hospitals, schools, coastal projects, hotel renovations | No fixed MOQ Factory-direct Free samples (freight covered by buyer), pre-shipment inspection |
| Siporex | Saudi Arabia (local factory) | Fastest lead times in KSA Local production for urgent projects | 1220×2440 mm3/6/9/12/15/25 mm | E1 emission (0.04 mg/m³) EN 14322 surface performance | Contractors with tight deadlines | Listed on Alibaba or via local distributors Typically starts from 2×20GP |
| Asala Wood | Saudi Arabia (materials imported, locally manufactured) | Strong cost advantage Wide color and grain catalog | 122×244 cm (4×8 ft)3/6/9/12/18 mm | Furniture-grade MDF | Furniture factories, distributors, hotel fit-outs | Website inquiry Volume-based pricing tiers |
1. Lamintec (Salco Laminates Industry)
The Salco Group brings 45+ years of industry know-how. Lamintec launched in 2006 and grew into one of the MENA region’s biggest Melamine Board makers.
What sets Lamintec apart for bulk buyers? Full vertical integration. They don’t just put boards together. They make their own resins. They run paper impregnation lines. They operate advanced pressing facilities—all in one place. This complete control is rare among regional competitors. Every production stage happens in-house, so you get consistent quality across huge order volumes.
Product Specs for Large Projects
Lamintec’s melamine faced MDF boards come in standard sizes that fit large furniture and interior projects:
- Primary sheet sizes: 2100mm x 2800mm and 2120mm x 3150mm
- Standard thickness range: 17mm–18mm for common sizes
- Custom thickness: Available on request for bulk orders
- Surface treatment: Melamine decorative printed paper pressed to both sides (single-side option available)
These sizes work great for kitchens, bedroom wardrobes, TV units, office desks, and closet systems. These are the core projects for furniture makers and contractors who buy in volume.
Why Bulk Buyers Pick Lamintec
Production capacity handles demand spikes. Lamintec runs one of the MENA region’s largest operations. Container-load orders? No production delays. Their plant handles seasonal rushes and big projects with ease.
Technical customization made easy. Need specific thickness combos? Want different patterns for a hotel chain? Their in-house resin and impregnation setup lets them adjust specs fast. No outsourcing delays.
Supply chain you can count on. Vertical integration cuts external dependencies. Third-party suppliers hit problems? Lamintec keeps making boards. Distributors and contractors in Saudi Arabia work with tight timelines. This independence means fewer stock issues and delivery dates you can predict.
Lamintec serves the KSA market as a local supplier with serious production power. Need high volume and custom specs? This is your match.
2. Modecor
Modecor works under the Madar brand. They make thermo-fused melamine MDF panels. Their factory creates boards for flat and upright uses. Think tabletops, cabinet doors, wall panels, shelves, and room dividers. All share the same core product.
Flexible Application Range
Furniture makers use Modecor’s panels most. Kitchen cabinets, wardrobes, office desks, and store displays need their smooth finish. Interior designers also pick these panels. Wall covers, decorative boards, and custom woodwork fit their standard sizes.
The 1220 x 2440 mm size works with typical Saudi workshop tools. CNC routers, panel saws, and edge machines cut these sheets. No special setup needed. You get thickness from 3mm to 25mm. Light backing boards? Covered. Strong furniture parts? Covered too.
Surface Options That Match Project Aesthetics
Four textures give bulk buyers choices:
- Matt finish: Clean, flat surface for modern minimal looks
- Pearl finish: Soft shine adds depth to modern spaces
- Nature Touch: Feels like real wood grain
- Ash wood: Looks like real wood for classic furniture
Got mixed design needs? Stock several finishes. Hotels fixing guest rooms and lobbies need different looks for each area. One supplier gives you multiple style options.
EN 14322 Compliance Reduces Risk
These panels meet EN 14322 European rules for decorative boards. They resist scratches, stains, and cracks well. You get fewer warranty issues. Distributors handle fewer returns.
Custom Order Process for Pre-Laminated Melamine MDF Sheets Suppliers in Saudi Arabia
Modecor doesn’t list prices online. They don’t show stock numbers either. Each order gets handled based on your project size. Contact them through their website or authorized dealers.
Tell them what you need: panel size, thickness, surface type, and standards. Ask about minimum order amounts for custom specs. Talk about shipping. Factory shipments come on pallets ready for containers. Want custom texture matching? Request samples that fit your design before ordering big volumes.
3. Baier MDF Boards
Baier makes moisture-resistant and fire-rated melamine MDF sheets. Bulk buyers need these two features for commercial spaces, hospitals, schools, and coastal projects in Jeddah or Dammam. Regular MDF swells and warps from water exposure. Fire-rated boards help public buildings meet safety codes.
Technical Performance That Beats Market Standards
Baier’s boards exceed standard industry performance numbers:
Moisture control:
Water absorption stays at 1.4% in 24 hours. Industry standard allows up to 8%. You get less warping in Saudi Arabia’s humid coastal areas.
Thickness stability:
Swelling measures just 1.4% versus the 12% limit. Doors and cabinet frames keep their fit over time.
Structural strength:
Internal bond strength hits 0.75 MPa. The requirement sits at 0.5 MPa. Stronger bonds reduce edge failures during cutting and installation.
Screw-holding power:
Face screws hold at 1960N, edges at 1170N. Standards ask for 1100N face and 900N edge. Hardware stays tight longer, and installers get fewer service calls.
Formaldehyde emission: Tests show 0.04 mg/m³. E1 grade allows up to 0.124 mg/m³. This meets green building codes and corporate ESG rules.
Flexible Customization for Large Projects
Standard sheet sizes:
1220×2440mm, 1220×2745mm, 1220×2800mm, 1220×3050mm.
Thickness options: 6mm–18mm.
Factory-direct bulk orders can get custom dimensions.
Design options:
Solid colors: white, red, blue, green
Wood grains: cherry, oak, ash, walnut, maple, birch
Finishes: matt, glossy, texture, bump
Hotels can refurbish multiple floors and match different room types with one supplier.
Density ranges from 730–850 kg/m³, giving easy workability plus strong durability.
Bulk Order Process Built for Contractors
Baier works through factory-direct communication.
No fixed MOQ — minimums depend on your specs and timeline.
Shipping details:
Boards ship on pallets at 1600–1800 kg per pallet.
20-foot container: 8 pallets
40-foot high cube: 16 pallets
Samples:
Free samples are standard; you cover freight costs. Test the boards before placing container orders.
Inspection:
You can request pre-shipment inspection after production.
Payment: T/T and l/C at sight for international orders.
4. Siporex
Siporex runs its own factory in Saudi Arabia. This local setup gives bulk buyers a big advantage: shorter wait times and faster delivery. No long shipping delays from Asia or Europe. You work with a Saudi-based factory. They know regional delivery schedules. Urgent orders? They handle them fast.
Local Production Advantage for Pre-Laminated Melamine MDF Sheets Suppliers in Saudi Arabia
Factory proximity cuts waiting time. International suppliers need 30-45 days for container shipments. Add customs clearance on top of that. Siporex ships from inside the Kingdom. You get boards faster for tight-deadline projects. Construction deadlines don’t wait. Local inventory and production speed keep your timeline on track.
Custom specs get processed faster. Need a specific thickness or surface pattern? Local factories adjust production runs. No international communication delays. Submit your requirements. Get samples within days, not weeks. Approve specs. Production starts right away.
Product Range and Technical Standards
Siporex makes melamine-faced MDF boards in standard and custom setups:
- Sheet sizes: Common trade size is 1220 × 2440 mm; custom dimensions available by request
- Thickness options: 3, 6, 9, 12, 15, and 25 mm cover light to heavy-duty uses
- Density: 730–850 kg/m³ matches industry standards for furniture-grade MDF
- Surface grades: AA/AAA grade standard keeps decorative quality consistent
- Formaldehyde control: E1 grade emission at 0.04 mg/m³—well below the 0.124 mg/m³ limit
Boards meet EN 14322 standards for surface properties. You get strong resistance to scratching, moisture, and stains. Need moisture-resistant or fire-retardant versions? Available on request for special commercial projects.
Ordering Process Through Alibaba
Siporex lists on Alibaba.com for the Saudi market. Contact them through the platform. Or work with certified Saudi distributors. Minimum orders start at two 20-foot containers. Negotiation is possible based on your project scale.
Request free samples before placing bulk orders. You cover freight costs. Test surface quality, thickness tolerance, and edge stability with your own tools. Factory visits for pre-shipment quality checks can be set up. Inspect production batches before final payment.
Payment works through T/T or L/C. Production starts after we confirm your deposit. Boards ship on pallets at 1600–1800 kg per pallet. Standard container capacity: 8 pallets for 20-foot containers, 16 pallets for 40-foot high cubes.
5. Asala Wood
Asala Wood sources materials from Thailand, Malaysia, and China. Then they manufacture everything locally in Saudi Arabia. They run their own factory there. You get quality control at prices that compete.
Comprehensive Thickness and Size Matrix
Asala Wood stocks five thickness options. These cover most furniture and interior projects:
- 3mm (1/8″): Lightweight backing panels, drawer bottoms, decorative overlays
- 6mm (1/4″): Cabinet backs, furniture dividers, thin wall paneling
- 9mm (3/8″): Shelving, light-duty furniture components
- 12mm (1/2″): Standard cabinet construction, moderate-weight shelves
- 18mm (3/4″): Heavy-duty shelving, tabletops, structural furniture parts
All panels come in 122 x 244 cm (4 x 8 ft). This is the standard size across the industry. Your workshop equipment works with these right away. Cutting tools, panel saws, and CNC machines need no adjustment.
Veneer Color Range for Design Flexibility
Surface options include white, black, and a full catalog of wood grain patterns. Oak, walnut, and cherry are available. So are exotic grain visuals. Hotels can redesign multiple floors using one supplier for all looks. Furniture makers stock varied showrooms without juggling multiple vendors.
Pre-veneered panels arrive ready to use. This saves finishing time and labor costs. Distributors can stock inventory that looks complete. It sells faster.
Streamlined Bulk Ordering Process for Pre-Laminated Melamine MDF Sheets Suppliers in Saudi Arabia
Asala Wood handles orders through their website:
Step 1: Browse the complete color and veneer catalog online. Save screenshots. They help during client or designer discussions.
Step 2: Submit your bulk inquiry through the website contact form. Include your project timeline, target quantities, and payment terms you prefer.
Step 3: Specify what you need. List thickness combinations, sheet counts per size, and color distribution. Their team creates a detailed quote. You’ll see unit pricing and total container costs.
Step 4: Need compliance certificates? Request them early. Green building standards? Fire ratings? Ask upfront.
The quote review covers lead times, packaging details, and freight options. Payment terms vary by order size. Bigger volumes unlock better pricing and more flexible delivery dates.